www.rfm.com e-mail: info@rfm.com page 1 of 3 ?2008 by rf monolithics, inc. HN-210D - 4/10/08 developer kit (info: click here ) specifications HN-210D HN-210Dx hn-214d frequency band 2401 - 2471 mhz (usa) 2448 - 2480 mhz (france, spain) licensing unlicensed under fcc part 15, etsi 300.328 number of channels 75 - us & etsi, 25 france hopping patterns user configurable, 64 patterns (networks) available i/o data rates up to 115.2 kbps asynchronous rf channel rate 460 kbps line of site range > 5 miles rf bandwidth 750 khz modulation type gfsk output impedance 50 ohms network protocol dynamically assigned tdma with arq transmit power eirp: +16dbm/+24dbm +18dbm eirp: +16dbm/+24dbm receive sensitivity -99dbm for 10 -5 ber -93 dbm for 10 -5 ber -99dbm for 10 -5 ber power requirements 9 vdc 160ma typ. 750ma surge serial data interface async. rs-232 the HN-210D is a versatile, low cost, multi-pur pose 2.4 ghz frequency-hopping wireless data modem. the HN-210D communicates through a serial port and over th e air at 460.8kbps and supports both point-to-point and point-to-multipoint networks. 2.4ghz frequency hopping wireless data modem HN-210D features: ? 2.4ghz frequency hopping spread spectrum technology ? 460kbps over the air and 115kbps i/o data rates ? 64 hopping patterns ? fcc certified and ce marked ? integral 6db patch antenna ? rs-232 asynchronous serial interface benefits: ? exceptional immunity to multipath fading and jamming ? supports high speed applications needing long range ? co-location of multiple networks without interference ? license-free application worldwide ? cost-effective, simple installation ? connects to pc serial ports
www.rfm.com e-mail: info@rfm.com page 2 of 3 ?2008 by rf monolithics, inc. HN-210D - 4/10/08 mechanical specifications HN-210D HN-210Dx hn-214d antenna integrated 6db patch n/a integrated 6db patch case materials polycarbonate, nema 4x dimensions (mm) 130 x 79 x 35 (excl. flange) weight excl. cable 235g antenna connector n/a tnc male n/a data connector 9-pin d power connector 2 terminal connector environmental specifications temperature range -30c to +70c (radio enclosure) humidity 95% at +40c, non-condensing power supply serial adapter box HN-210D with 50 feet of cable
www.rfm.com e-mail: info@rfm.com page 3 of 3 ?2008 by rf monolithics, inc. HN-210D - 4/10/08 built around the wit2410 radio, the HN-210D has an integral 6db patch antenna creating a "single piece" modem. communication wi th the HN-210D is through a 115.2kbps asynchronous serial por t supporting a standard rs-232 interface. the HN-210D communicates over the air at 4 60.8kbps and supports both point-to-point and point-to-multipoint networks. with a nema 4x weatherproof enclosure and aluminum mounting flange, the HN-210D is simple to install on the side of a building or attached to a mast. with no antenna to connect, the HN-210D is simply mounted where the antenna would ordinarily be mounted. this removes the need for long antenna cable runs, expensive in terms of both cost and performance. the HN-210D comes with a 50-foot cable that connects to a din-rail mount serial adapter box (standard rs-232 serial 9-pin d con nection) making installation in equipment cabinets simple. the hn-214d comes with a 4-foot cable for use when long cable runs are not needed. t he serial adapter box also provides power to the HN-210D through a universal 110/220 50/60 wa ll-mount power supply (also included). the integral 6db patch antenna provides a line-of-site range of several miles, making the HN-210D ideal for a variety of "last mile" applications. for applications requiring more antenna gain, the HN-210Dx replaces the built-in patch antenna with an external tnc connector. when paired with the cirronet snap2410 family of products, the HN-210D provides a cost-effective link from remote devices to et hernet/ip-based applications. these applications include intr anet-based applications as well as internet access. the HN-210D also is ideal for use in scada applications as remote modems in multipoint configurations and is an extrem ely cost-effective solution for point-to-point installations. sel ectable transmit power levels of 10mw and 100mw allow the HN-210D to be used worldwide, even with the gain of the patch antenna. based on the cirronet wit2410 spread spectrum frequencyhopping radio, the HN-210D has exceptional multipath fade rejection as w ell as immunity to jamming. the wit2410 is a field proven performer that delivers robust, reliable, real-world performance. the HN-210D is both fcc and ce marked. operating in the 2.4g hz ism band, the HN-210D can be deployed around the world without a license.
|